Arofanatics Fish Talk Forums

Arofanatics Fish Talk Forums (http://www.arofanatics.com/forums/index.php)
-   Tank set-ups, Filtration & Water Management (http://www.arofanatics.com/forums/forumdisplay.php?f=4)
-   -   Mr aqua ohf base always leak (http://www.arofanatics.com/forums/showthread.php?t=538099)

johnphua 21-01-2017 07:37 PM

Mr aqua ohf base always leak
 
I've just returned to the fish keeping hobby after 2 years break. I've started a 2ft x 1.5ft x 1.5ft tank for a flowerhorn. I've noticed the base of the mr aqua always leak. Due to a little bit superstition, water leak = no good. Since then, about 1 month plus, I've changed 3 sets of mr aqua as the shop didn't sell base alone. But it still leaks.

After flipping thru the forum and found N30 is doing glass base for this mr aqua ohf so immediately order one. This morning just collected and was happy about their workmanship. It fixed nicely on my tank. Make use of this opportunity to stick black oyama on the two containers to make it look nicer

Is this mr aqua ohf base like that easily break or leak? It is my 1st time using ohf as previously using sump systemhttps://uploads.tapatalk-cdn.com/201...cdaf8288eb.jpghttps://uploads.tapatalk-cdn.com/201...bbf19b9a1f.jpghttps://uploads.tapatalk-cdn.com/201...f45ff85ed3.jpg

llewellyn 21-01-2017 09:35 PM

Your first picture not clear, cannot really see clearly where exactly is the leak except for the red circle obstruct by the light. :confused:

The other two pictures are clearer but not necessary since it doesn't show the problem you are asking.

All my ohf (7) got no such problem. Most likely its your setup/arrangements (uneven placement of trays, base etc) ....
:D

LauLanChu 22-01-2017 01:20 PM

Small tank like yours usually don't comes with the center bracing and due to the weight there will be slight bend towards the center. Water get to the tray will be compromising from flowing out of the outlet and might have slight overflow on the other end. To resolve this problem you got the straighten the tray base by some bottom support. Also do ensure outlet is fully clear with no blockage and water don't fill beyond and above the outlet may also help.

matthew 23-01-2017 12:38 PM

yes it always leak at the bottom tray becos the bottom tray are glued together.

another brand called "CL" will not have this problem as it is single mold tray. but the size of the box is different.

Personally to me...as long as the leak isn't much. I wun be bother by it as the leaked water still go thru the filtration process and back to the tank.

ymmij 24-01-2017 01:27 PM

Actually leak is not a big problem so long the leaked water gets into the tank.

Mine leaked too,

Make sure if the leaked water make a splash, the light is not near.


All times are GMT +9. The time now is 04:17 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright 2000-2008 Arofanatics.com (Since 30th August 2000)