i have total of 4 canister, not fluval though, but Ejet.
I have 3 that run the full length, lazy to cut the hose and 1 that running at very short length.
2 x canister on right side and same height, placed about 1m away from the tank. 1 for top tank and 1 for bottom tank.
2 x canister next to left of tank, of which 1 x canister is for top tank and 1 x canister is just beside the bottom tank canister on a slightly raised floor.
Is a 2 tier stand so bottom tank height is about slightly more than 2 ft and top tank height at highest point is about 6ft
no such issue on all 4 canister. super quiet.
just curious, when you change the impeller, does it include the magnet? Maybe magnet not strong enough to hold impeller
|