![]() |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||||||
![]() Dragon
![]() ![]() ![]() ![]() ![]() Join Date: Jul 2009
Posts: 701
|
![]()
Dear friends!
We are excited to introduce the new energy saving pump that delivers high flow rate but uses much less electricity than normal pumps! Example, a 20000L/H pump traditionally uses 400-450W, but the AMPHI PLUS uses just 170W! ![]() FEATURES AMPHI PLUS is a variable speed amphibious (wet/dry) pump designed and built for reliable pumping performance. The Inverter Technology allows efficient use of energy with energy savings of up to 70% while retaining strong and consistent water flow.
Adjustable Flowrate and Feed Mode
Intelligent Overheat Protection AMPHI PLUS features a special protection circuit that protects the motor from damages when the below cases happen: Anti-Dry Protection In the event that the pump is removed from water, or under any situation whereby the pump is unable to draw water (running ‘dry’), the anti-dry protection will kick in. After the pump runs ‘dry’ for 2 ½ minutes, it will stop for a few seconds, and run again for few seconds. These stop and run cycle will repeat 5 times before the pump enters the stop-protection mode. Turn off the power, replace pump back into water or draw water into pump before restarting. Turn power on to use. Anti-Stall Protection In the event that the impellor is stalled (jammed), the pump will enter the stop-protection mode. Turn off the power and remove the cause of the obstruction. Turn power on to use. Current-Surge Protection In the event that the pump is affected by a sudden surge in electrical current (due to external factors) beyond the maximum operating current, the pump will enter the stop-protection mode. Turn off the power. Turn power on to use. Application
Specifications AMPHI PLUS 13000. Max Flow 13000L/H. 115W Max Power Consumption AMPHI PLUS 15000. Max Flow 15000L/H. 135W Max Power Consumption AMPHI PLUS 18000. Max Flow 18000L/H. 150W Max Power Consumption AMPHI PLUS 20000. Max Flow 20000L/H. 170W Max Power Consumption Click here for full technical specifications. Components ![]() Video Video shows the AMPHI PLUS going through the different modes. The variable speeds allows it to be used in different applications. Lastly the feed mode switches the pump off for 15 or 60 minutes and automatically switches the pump on after the selected time.
Last edited by Qian Hu; 14-08-2017 at 11:12 AM. Reason: Update URL and Image |
||||||
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|