Feedback on TOM 800 Powerhead

Just bought a return pump today.
The brand is TOM 800.
Its small, and the flowrate is 3200L/H.
Power consumption is 34.5W - 25.2W
AC200V / 240V
50Hz

The flowrate is just nice for my 3ft tank. Hope anyone using this return pump could give their feedback and comments.

It's a very good pump, quiet, powerful but vibration is a little bit strong!

Used to have one for my 2ft setup, quite satisfied with the performance.
But i feel it may not be sufficient for a 3ft.

Originally Posted by kpk

Used to have one for my 2ft setup, quite satisfied with the performance.
But i feel it may not be sufficient for a 3ft.

Thanks for the feedback but mine runs in my 3ft tank well.
Any idea how long the pump would last?
Also another factor is the low wattage which would save quite lot of $ in the long run.

I have been using this pump for a long time...at one stage was even using it as a return pump for my 6 footer...actually strong enough. but now use it as a power head in that tank.
Where can you find a Japanese made (not China, Taiwan) pump for that kind of price...One of the pumps have been running for over 3 years and it sill works fine.
Real value for money.

value for money.. had it in my tank for the past 3 yr as a return pump. so far so good!

[TROY041004]

Originally Posted by kpk

Used to have one for my 2ft setup, quite satisfied with the performance.
But i feel it may not be sufficient for a 3ft.

TOM 800 for 2ft tank? maybe it is too strong. Im using this pump in my 5 ft tank..

Originally Posted by TROY041004

TOM 800 for 2ft tank? maybe it is too strong. Im using this pump in my 5 ft tank..

I also think so .I use it for my 6 footer to create water movement. The pump is very quiet, quite good. Totally submersible too.

[jenson]

Thank Bro Humongous for the pictures and comparison. But I'm still not clear from the pictures and elaboration. Able to be a bit more detailed? Pai seh...

Originally Posted by jenson

Thank Bro Humongous for the pictures and comparison. But I'm still not clear from the pictures and elaboration. Able to be a bit more detailed? Pai seh...

Pardon my lacking in the command of english....

conclusion,

Lower Better

Aquanic 3000 (5x2x1.5)
Headloss - Mid high
Noise - Mid (Humming)
Vibration - High
Water Temp 28.5

Dyna 3000 (5x2x2)
Headloss - Mid
Noise - Low
Vibration - Mid High
Water Temp 27.3

Eh 1260 (5x2x1.5)
Headloss - Minimal
Noise - Low
Vibration - Low
Water Temp 29.4

Eh 1262 (5x2x2)
Headloss - Minimal
Noise - Low
Vibration - Low
Water Temp 29.7