Quote:
Originally Posted by JeffL
I have both IQ5 and IQ3, I think IQ5 has this problem on the last chamber that you water evaporate too fast the water level will drop too low thus causing the pump to take in air. Must be careful of it, because I think if left unattended the pump will overheat.
IQ series filtration is not very good IMO. Tried upgrading to a faster flow pump but it's a challenge to find small pump for the chamber and piping has different sizes.
Try change more water for better water condition since the filtration doesn't really work well.
Make sure top up enough water. You can DIY a auto water top up to prevent water level drying up too much
|
Yah..I always find myself just topping up the last chamber water..the middle one somehow water level don't drop..the ori filtration not very good and I find the water thats flowing over is very slow n little