|
14-10-2010, 11:26 AM | #1 |
Guest
Posts: n/a
|
External Temperature Sensor
Recently, went to sim lim and bought the external sensor to replace the built-in sensor(Fox). Am using a 150A. After installing and everything's running, was wondering how accurate is the sensor? (i placed the probe at the inlet of the filter) LCD on the chiller was showing eg. 25.6 but the digital thermometer i placed inside the tank was showing eg. 27.5 Anyone can shed some light on it?
|
15-10-2010, 08:57 AM | #2 |
Guest
Posts: n/a
|
delta could be due to the sensor error range, or more likely the temp distribution. which is why some of the chiller has external probe that allows u to dropped into the tank. circulation affects reading
|
15-10-2010, 09:13 AM | #3 |
Arofanatic
Join Date: Jul 2002
Posts: 254
|
is it the same basement shop on the left from main stairs? how much is it going for now..? was considering eliwell also..
|
15-10-2010, 10:06 AM | #4 |
Guest
Posts: n/a
|
$15 for e probe. Connectors can get from 3rd floor at a few cents
|
06-02-2011, 10:43 PM | #5 |
Arofanatic
Join Date: Dec 2007
Posts: 54
|
i having the same issue too with digital thermometer
however after i change to those mercury type, the reading seen to be more in sync with each other(chiller and mercury thermometer). |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|