12ft FGT setting up...

mudskippy · 10-07-2012, 05:38 AM

Just wanna share the new 12x4x3ft FGT whole setting up process till complete. Personally I always like to keep a record of my tank/pond setting process. As I wish to get comment/advice from experienced bros to further improve the setup if any. All comments are welcome. Enjoy...

After 1 week plus of waiting, the special custom made 12ft FGT has finally arrived today

The giant FGT estimated over 200+kgs, and requires 10 adults male to carry up onto the small lorry

Unwrapped the plastic. The 12 footer comes with an 8x2ft 12mm front glass panel and a 3x2ft 12mm glass panel on the right side

mudskippy · 10-07-2012, 05:39 AM

Slowly moving the FGT off the lorry

mudskippy · 10-07-2012, 05:44 AM

This 12ft fgt is massive & huge. Even though I have mentally prepared regarding the size, but when it arrives, I still shocked by its gigantic size and look

The back view of the FGT

How are we going to get the 12ft length over 200+kgs FGT passes through the corridor without scratching or knocking??

Finally decided to lay down the FGT from the side, thus it could pass through the corridor narrowly

mudskippy · 10-07-2012, 05:46 AM

Even just to lay down the fgt to the side also a tough job

mudskippy · 10-07-2012, 05:47 AM

Finally make it lay down from the side vertically

The most diffulty part coming. There is a door stair blocking the path. They need to keep adjusting and slowly move the fgt in

mudskippy · 10-07-2012, 05:49 AM

Alamak, how we going to make the thing through

Just keep trying and pushing

Pulling from the other side. A great applause to Ah Mok (who can speak fluent Madarin) for using his maximum effort to pull the heavy FGT in

Finally reach the destinate location to place the FGT

mudskippy · 10-07-2012, 05:52 AM

It is another round of tough job to turn the FGT back to its original position within such limited spaces. Remember, this thing weight over 200+kgs with 12ft length & 4ft wide

mudskippy · 10-07-2012, 05:54 AM

Finally turn back the FGT and place on top the prepare concrete basement

Nicely fit in

From upper view

Full tank front view. Half way done, stay tune and more photos and update coming the next 2 days

mudskippy · 10-07-2012, 05:56 AM

Project is just half way done. Please stay tune and more photos and updates coming the next 2 days. Do appreciate some ups for the sharing effort...

eNox · 10-07-2012, 08:32 AM

Can't wait to see the fishes in there !

Wah , really jelly though .

10-07-2012, 05:38 AM	#1
mudskippy Dragon Join Date: Apr 2007 Posts: 954	12ft FGT setting up... Just wanna share the new 12x4x3ft FGT whole setting up process till complete. Personally I always like to keep a record of my tank/pond setting process. As I wish to get comment/advice from experienced bros to further improve the setup if any. All comments are welcome. Enjoy... After 1 week plus of waiting, the special custom made 12ft FGT has finally arrived today The giant FGT estimated over 200+kgs, and requires 10 adults male to carry up onto the small lorry Unwrapped the plastic. The 12 footer comes with an 8x2ft 12mm front glass panel and a 3x2ft 12mm glass panel on the right side

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-07-2012, 05:39 AM	#2
mudskippy Dragon Join Date: Apr 2007 Posts: 954	Slowly moving the FGT off the lorry

10-07-2012, 05:44 AM	#3
mudskippy Dragon Join Date: Apr 2007 Posts: 954	This 12ft fgt is massive & huge. Even though I have mentally prepared regarding the size, but when it arrives, I still shocked by its gigantic size and look The back view of the FGT How are we going to get the 12ft length over 200+kgs FGT passes through the corridor without scratching or knocking?? Finally decided to lay down the FGT from the side, thus it could pass through the corridor narrowly

10-07-2012, 05:46 AM	#4
mudskippy Dragon Join Date: Apr 2007 Posts: 954	Even just to lay down the fgt to the side also a tough job

10-07-2012, 05:47 AM	#5
mudskippy Dragon Join Date: Apr 2007 Posts: 954	Finally make it lay down from the side vertically The most diffulty part coming. There is a door stair blocking the path. They need to keep adjusting and slowly move the fgt in

10-07-2012, 05:49 AM	#6
mudskippy Dragon Join Date: Apr 2007 Posts: 954	Alamak, how we going to make the thing through Just keep trying and pushing Pulling from the other side. A great applause to Ah Mok (who can speak fluent Madarin) for using his maximum effort to pull the heavy FGT in Finally reach the destinate location to place the FGT

10-07-2012, 05:52 AM	#7
mudskippy Dragon Join Date: Apr 2007 Posts: 954	It is another round of tough job to turn the FGT back to its original position within such limited spaces. Remember, this thing weight over 200+kgs with 12ft length & 4ft wide

10-07-2012, 05:54 AM	#8
mudskippy Dragon Join Date: Apr 2007 Posts: 954	Finally turn back the FGT and place on top the prepare concrete basement Nicely fit in From upper view Full tank front view. Half way done, stay tune and more photos and update coming the next 2 days

10-07-2012, 05:56 AM	#9
mudskippy Dragon Join Date: Apr 2007 Posts: 954	Project is just half way done. Please stay tune and more photos and updates coming the next 2 days. Do appreciate some ups for the sharing effort...

10-07-2012, 08:32 AM	#10
eNox Arofanatic Join Date: Jun 2012 Posts: 421	Can't wait to see the fishes in there ! Wah , really jelly though .

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)