Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > General Aquatic Forums > AroReefers > Product Reviews

Reply
 
Thread Tools Display Modes
Old 17-07-2005, 10:15 PM   #1
nim75sg
Guest
 
Posts: n/a
Default Enaly E0Z-300Y Ozone Generator

Got my hand dirty today to install this China-made Ozone Generator and following are my comments about this product.

The unit is pretty "big" in comparison with other makes and the max out capability is 200mg/h. The unit doesn't comes with a proper packaging and the reason could be due to cost saving shipping charges.

The unit comes with 2 pieces of tubing and 2 airstones (1 round and the other rectangle) ans a simple instruction manual stapled together to form a manula.

The unit itself is powered directly by 220V AC power supply and is protected by a fuse. Both the input & output or rather air inlet or Ozone outlet are located at the other side of the unit to the power supply and can be use either as air hole or ozone outlet.

Quality wise . it is ok but don't expect German or Swedish quality but like all ozone generators ... handle the unit with extreme care ..... and examine for cracks before powering up the unit.

You can either supply air to the ozonizer by using the supplied silicon air tube from an air pump to the one of the inlet and the ozone outlet via the air tube to the airstone into the same compartment as the skimmer in the sump.

The other alternative is to connect the ozone outlet directly to the venturi input of the skimmer.

Pros:
1) Price is very affordable for those who want an inexpensive ozonizer
2) 1 year warranty from date of purchase

Cons:
1) Doesn't have a power indicator when the unit is powered on except a push-on switch
2) No rheostat control to adjust the ozone output
3) Tends to get warm or heated up easily
4) Can smell the presence of ozone

Recommendation:
1) Do USE the ORP controller in conjuction with this unit otherwise deploy a timer for a 4 hours usage as the unit tends to get "warm".
2) Use an air-pump which has a variable lcontrol knob to control the ozone output as the ozone output is determined by the amount of air feeding it from the airpump.
  Reply With Quote
Old 17-07-2005, 10:16 PM   #2
nim75sg
Guest
 
Posts: n/a
Default

Here is a closer look of the unit:
  Reply With Quote
Old 17-07-2005, 10:17 PM   #3
nim75sg
Guest
 
Posts: n/a
Default

The setup showing the unit resting on a Resun Air-pump:
  Reply With Quote
Old 17-07-2005, 10:29 PM   #4
wlchew
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by nim75sg
The setup showing the unit resting on a Resun Air-pump:
Well Done. But I think the Air-pump is over-size leh...

Anyway,.. nice report.
  Reply With Quote
Old 17-07-2005, 10:36 PM   #5
nim75sg
Guest
 
Posts: n/a
Default

That's the only air pump I found in the store room ....
  Reply With Quote
Old 17-07-2005, 11:26 PM   #6
subxero
Guest
 
Posts: n/a
Default

Ha ha.. Think that is one of the cheapest ozone generator around
  Reply With Quote
Old 18-07-2005, 12:02 PM   #7
jowen
Guest
 
Posts: n/a
Default

I also got one china brand ozonizer last week too...
it cost me only 1++.
it comes with intergrated timer and pump.. there is led indicator when onzone is on and off...
u can set the duration "on" and "off" for the ozone ...
the cons: it smells my living room with the ozone ......
package comes with two rolls of silicon tubing and 2 air stone.
i replace the air stone with the wooden block..
will try to post a pic tonight ....
  Reply With Quote
Old 18-07-2005, 02:14 PM   #8
nim75sg
Guest
 
Posts: n/a
Default

Jowen .. very useful info and hope other reefers are aware of the ozone fragance(whether leakage or overdose) before they make the decision of getting it otherwise it will have an adverse effect on the occupants in the house.

What brand is your ozone generator?
  Reply With Quote
Old 18-07-2005, 04:11 PM   #9
jowen
Guest
 
Posts: n/a
Default

bro is a china brand and i cant even remember it ...
juz grab and use ...
  Reply With Quote
Old 18-07-2005, 11:48 PM   #10
iori_del
Guest
 
Posts: n/a
Default

i must admit tat it is very fragile, one of the outlet break when i just pull the tube out..

to weak for the china product, lucking my skimmer able to put ozone in, dun need a air pump to run it..
  Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 08:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)