Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > Arowana Forum > AFC Associate Members Forum > sg Bros Entrepreneurs

Reply
 
Thread Tools Display Modes
Old 16-08-2012, 11:38 PM   #11
fat jester
Guest
 
Posts: n/a
Default

Boss,can pm me the cost of 6 sets of 4x2x1 tanks,inc setting up air pipes for the 6 tanks and installing the 3 pin power points?
  Reply With Quote
Old 17-08-2012, 12:39 PM   #12
nosense

AFC Member
 
nosense's Avatar
 
Join Date: May 2003
Posts: 7,327
Default

by Tank Junction - 60'' x 30'' x 30'' 12mm cab sump








Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 60'' x 30'' x 30'' with 12 mm thickness






Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.




Overflow box: Right hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay. The tank’s cleanliness can thus be maintained fuss-free. We also have our very own exclusive laser cut acrylic comb for the filter. This comb is unlike the others found in the market, boasting better flexibility but at the same time, very durable.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Oyama pasting: Black (Base, Back, Right Hand Side, Left Hand Side) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.


Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.



To be continued...
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3
AF/AFC Preferred Fish Tank Specialist Since 2003
LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings

Last edited by nosense; 06-09-2012 at 05:07 PM.
nosense is offline   Reply With Quote
Old 17-08-2012, 01:10 PM   #13
nosense

AFC Member
 
nosense's Avatar
 
Join Date: May 2003
Posts: 7,327
Default

CABINET

Cabinet Specs: 60" x 30" cabinet with kapor structure







Choice of wood for Cabinet: Kapor - Kapor solid structured wood cabinet was chosen by our customer in this case. We do have Chengal available as well. Both are naturally durable, containing substances which repel wood-destroying agents and fungal infestation. They can safely be used without preservative treatment in all climates. These two types of timber are water-resistant. Due to its hardy and solid nature, Kapur and Chengal enable support for heavy tanks.






Louver Doors and Removable Center Structure - One popular key feature of our TJ cabinets are our 45 degree cutting downwards sloping at the top of doors, which allows minimal effort when opening the cabinet. As such, we do not need to open the doors using the conventional way of bending all the way down to open the doors from below, enhancing convenience. Our doors come with ABS trimmings. This ensure that the doors are waterproof, increasing protection of the doors. Louvers on the doors allow better ventilation as the electrical equipment such as pumps in the sump tank generates heat. Louvers enable the hot air to steam out and are thus highly recommended. The removal centre structure acts as a pivot to provide better stability and ease of removal of sump tanks.






Lamination: 3 way lamination (0102PG Piano White by EDL) - we have 3-way lamination or 4-way lamination with many colors of the Formica to choose from. As the picture shows, we even line up the surface area of the holes with Formica paper for a neater look as well as better comfort. This is another trademark feature of TJ cabinets.


Hood and Borders - The L-shape and straight borders cover up the sides of the tank, giving it a full height cabinet look.The hood covers up the lights of the tank.


SUMP TANK

Sump Tank Specs: 48" x 18" x 16" 6mm




Main Sump Tank: sloping and wet - we also have sloping sump tank as well as dry sump tank available.


Sump tank covers - Sump tank covers are provided to prevent water from splashing out and affecting the interior of the cabinet. We have installed 2 long strips along the last 3 compartments of the sump tank to allow the placing of the acrylic tank covers.


Full siliconless piping - Piping can be used for immediate submersion into the water as there will no acrylic or poisonous smell affecting the water. Our sump tanks use a special mould casket instead.




Top Up Tank - Customer has requested for an additional top up tank with dimensions measuring 8’’ x 18’’ x 20’’.


ACCESSORIES AND MEDIA



Full media package and Accessories: Economical full media package and setup (Mr Aqua package). Includes Mr Aqua Ceramic Rings, Bio-ball, Jap Matt (3x pcs), Coral Chip (2kg), Bacteria House, Cotton wool (1x packet) and Volcano rocks (2kg). Additional accessories include Eheim 1264, Ranger AC/DC Air Pump, 11W Aquazonic UV, timer and pump, Prime antichlorine, Bacteria Cultivator, salt, WeiPro optical PH meter and ATO top up system


Extensions: 4 way and 5 way extensions (1x pcs)


Lighting - Hopar T5 lighting 5ft: Customer chose 2 pieces of red and 2 pieces of white. Other colours available as well.



-THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3
AF/AFC Preferred Fish Tank Specialist Since 2003
LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings
nosense is offline   Reply With Quote
Old 21-08-2012, 01:08 PM   #14
nosense

AFC Member
 
nosense's Avatar
 
Join Date: May 2003
Posts: 7,327
Default

by Tank Junction - 60’’ x 30’’ x 24’’ 12mm cab sump + 12mm 1-tier, glass cvrs






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 60’’ x 30’’ x 24’’ with 12 mm thickness






Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Oyama pasting: Black (Base, 4'' all round) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.


Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.






METAL STAND

Metal Stand Specs: 60’’ x 30’’ x 18’’ single tier 6 legged 2x2 square bar metal stand






-THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3
AF/AFC Preferred Fish Tank Specialist Since 2003
LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings

Last edited by nosense; 06-09-2012 at 05:08 PM.
nosense is offline   Reply With Quote
Old 30-08-2012, 01:32 PM   #15
nosense

AFC Member
 
nosense's Avatar
 
Join Date: May 2003
Posts: 7,327
Default

by Tank Junction - 55_3_8'' x 25_1_2'' x 30'' 12mm front & back crystal panel tank, sump tank










Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 55_3_8'' x 25_1_2'' x 30'' front & back crystal panel tank with 12 mm thickness








Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed. The front and back panel is also made of crystal glass as requested by our customer.






Perimeter Bracing – 4 way Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general. Customer has also requested for additional glass in glass feature which increases the durability of the tank.


To be continued...
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3
AF/AFC Preferred Fish Tank Specialist Since 2003
LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings

Last edited by nosense; 06-09-2012 at 05:38 PM.
nosense is offline   Reply With Quote
Old 30-08-2012, 02:11 PM   #16
nosense

AFC Member
 
nosense's Avatar
 
Join Date: May 2003
Posts: 7,327
Default





Overflow box: Right hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay. The tank’s cleanliness can thus be maintained fuss-free. We also have our very own exclusive laser cut acrylic comb for the filter. This comb is unlike the others found in the market, boasting better flexibility but at the same time, very durable. Customer has requested for stainless steel wire mesh to be added around the OF box.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.



SUMP TANK

Sump Tank Specs: 36’’ x 18’’ x 18/16’’ 6mm






Main Sump Tank: sloping and wet - we also have straightsump tank as well as dry sump tank available.


Sump tank covers - Sump tank covers are provided to prevent water from splashing out and affecting the interior of the cabinet. We have installed 2 long strips along the last 3 compartments of the sump tank to allow the placing of the acrylic tank covers.

Full siliconless piping - Piping can be used for immediate submersion into the water as there will no acrylic or poisonous smell affecting the water. Our sump tanks use a special mould casket instead.

ACCESSORIES AND MEDIA



Full media package: Economical full media package and setup (Mr Aqua package). Includes Mr Aqua Ceramic Rings (3x boxes), Bio-ball (35x pcs), Jap Matt (3x pcs), Bacteria House (36x pcs), Cotton wool (1x packet), Volcano rocks (2kg). Additional accessories include Eheim 1264 water pump, Rio 20 pump, H.P Haliea, and ADH 9L of sand.


Lighting - Aquasonic T5 lighting 5ft: Customer chose 4 pieces of white. Many colours available as well.




-THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3
AF/AFC Preferred Fish Tank Specialist Since 2003
LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings

Last edited by nosense; 06-09-2012 at 05:09 PM.
nosense is offline   Reply With Quote
Old 30-08-2012, 05:04 PM   #17
nosense

AFC Member
 
nosense's Avatar
 
Join Date: May 2003
Posts: 7,327
Default

by Tank Junction - 36'' x 24'' x 24'' 10mm 2-tiers






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 2 tanks of dimensions 36'' x 24'' x 24'' with 12 mm thickness




Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.



Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.






Oyama pasting: 1 tank Black, 1 tank Blue (Base, Back, Right Hand Side) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Blue and Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.


Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.





METAL STAND

Metal Stand Specs: 36" x 24" x 42" metal stand







- 1.5 sq inch bar, 4-legged


-THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3
AF/AFC Preferred Fish Tank Specialist Since 2003
LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings

Last edited by nosense; 06-09-2012 at 05:10 PM.
nosense is offline   Reply With Quote
Old 30-08-2012, 05:53 PM   #18
nosense

AFC Member
 
nosense's Avatar
 
Join Date: May 2003
Posts: 7,327
Default

by Tank Junction - 36'' x 18'' x 18'' 6mm IOS tank, glass cvrs, Rio 8HF






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 36'' x 18'' x 18'' with 6 mm thickness






Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.




IOS System: Left hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Oyama pasting: Black (Back, Right Hand Side, Left Hand Side, Front IOS, 3'' water mark) White (Base) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black and White Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.




Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.



ACCESSORIES AND MEDIA


Accessories: Rio 8HF





-THE END-
__________________
SG Bros/Tank Junction/4K Lightings/MYCO3
AF/AFC Preferred Fish Tank Specialist Since 2003
LIKE US ON: www.facebook.com/sgbros or /tankjunction or /MYCO3logistic or /4klightings

Last edited by nosense; 06-09-2012 at 05:10 PM.
nosense is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 06:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)