Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > General Aquatic Forums > AroReefers > Articles, Resources & FAQs

Reply
 
Thread Tools Display Modes
Old 03-04-2005, 10:42 AM   #31
ArisingStar
Guest
 
Posts: n/a
Default

Just asked my friend to help me buy the CX448. Can the CX448 be used on the indoor air con unit ? or is it just for the outdoor condensor unit ?
  Reply With Quote
Old 03-04-2005, 07:00 PM   #32
sherman
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by bedoklist
looks good but my main unit is outside the windows....how to....

For the air-con unit inside the 3 rooms, i service myself. Dismantle the cover, filter and the main cover. Wash them up and next use a soft tooth brush and a small pail of water. Slowly brush down the fins and you can see the dirt being remove.

Take note, if 1st time do this very siong and take almost 3/4 day time. Neck and hand also very tiring but worth it. The 2nd time you do it will be a breeze. You will notice your room is colder than last time b4 cleaning.
Bro,
Just brushing with plain water is not so effective because our brushes cannot reach the inner side of the fin.
Annually you still need to do a chemical clean

Regards
  Reply With Quote
Old 04-04-2005, 07:05 PM   #33
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default

Quote:
Originally Posted by ArisingStar
Just asked my friend to help me buy the CX448. Can the CX448 be used on the indoor air con unit ? or is it just for the outdoor condensor unit ?
Its not recommended to use CX448 for indoor fan unit as the chemical will give off fumes.
BarraCuda™ is offline   Reply With Quote
Old 08-04-2005, 01:46 PM   #34
bingkla
Guest
 
Posts: n/a
Default

how abt spraying WD 40 as it is a solvent cum cleaner ?
  Reply With Quote
Old 08-04-2005, 06:24 PM   #35
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default

Quote:
Originally Posted by bingkla
how abt spraying WD 40 as it is a solvent cum cleaner ?
That will cause the condensor fins to be coated with oil, reducing heat transfer from the air. Oily fins will be a magnet for dirt as well.
BarraCuda™ is offline   Reply With Quote
Old 06-06-2005, 12:57 PM   #36
principal
Guest
 
Posts: n/a
Default

WD 40 is for lossen rusty parts. Although the coil cleaner is alkaline base but advisable to rinse it after u see the dirt coming out from the fins , cos in long time condition , it might damages the coil. Of the condenser is brnad new, and u do regular cleaning with water will do. But if your unit is very dirty, coil cleaner is a must to clear the dirt in it and better put on a mask when u do the cleaner and prevent chemical pouring at your hands. Cos the chemical will "bike" your hand....
  Reply With Quote
Old 09-06-2005, 12:24 AM   #37
seawater
Guest
 
Posts: n/a
Default

Has anybody got experience cleaning the cylindrical blower in the cooling unit. Have try soaking in water but unable to effectively clean it.
  Reply With Quote
Old 10-06-2005, 11:24 PM   #38
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default

Quote:
Originally Posted by seawater
Has anybody got experience cleaning the cylindrical blower in the cooling unit. Have try soaking in water but unable to effectively clean it.
I dont quite understand what cylindrical blower, you got photo?
BarraCuda™ is offline   Reply With Quote
Old 06-10-2006, 09:58 PM   #39
redbullk
Guest
 
Posts: n/a
Default

Hi i wonder do i need to mix the CX448 with water? Wow! This is a very informative forum on aro and hardwzre!
  Reply With Quote
Old 06-10-2006, 10:06 PM   #40
BarraCuda™
SiaoGu Gives You Wings
 
BarraCuda™'s Avatar
 
Join Date: Jul 2001
Posts: 4,169
Default

I did a 50% dilution before and it still works well!
BarraCuda™ is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 09:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)