Tank Junction (a subsidiary of sg Bros) *Nov New Tanksets*

[nosense]

by Tank Junction - 90cm x 36cm x 36cm 6mm bare tank (with front crystal panel)

Tank
- 90cm x 36cm x 36cm 6mm all round machine polish Japan Asahi Grade 1 glass
- crystal glass front panel 6mm thick
- Dow Corning silicon : clear
- 2 way bracing on the left & right only with one hole on back of each side
- Oyama : white - back only
- Additional 2 pcs of partition to separate the tank to 3 parts with 3 cm gap from the top of the tank to the start of partition to be ensured.

Other Services
- to drill a hole of about 10-12 cm on each glass partition with black wire mesh silicon on both sides of the glass cover




-THE END-

[nosense]

by Tank Junction - 24''x18''x18'' 6mm bare tank


Tank
- 24''x18''x18'' 6mm bare tank all round machine polish Japan Asahi Grade 1 glass
- Dow Corning silicon : clear
- Oyama : white - back, bottom, right hand side, left hand side
- 4 way bracing with 2 holes at the back





-THE END-

[nosense]

by Tank Junction - 60''x15''x18'' Low profile display cab only

Cabinet
- 60”x15”x18” wooden cabinet with 4 doors
- All round lamination : WPL5566HG by Jennings











-THE END-

[nosense]

by Tank Junction - 61''x24''x15'' low profile stand only + tpt of old 61''x24''x28'' bare tank + oyama pasting


Stand
- 61" x 24" x 15" single tier metal stand
- thickness - 2"


Other Services
- Transportation of 61"x24"x28" tank
- To supply n paste black oyama for back only
- To supply 1 pc plywood(1 side white)
- To supply 5'x2' foam






-THE END-

[nosense]

by Tank Junction - 72''x30''x30'' 12mm cab sump + full siliconless piping + double water fish transfer



Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 72''x30''x30'' with 12 mm thickness



Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.






Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general. Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.




Triangular Over/Under flow box: Right hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay. The tank’s cleanliness can thus be maintained fuss-free.




Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Oyama pasting: Black (Base, Back, Overflow) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.

Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.


CABINET

Cabinet Specs: 72" x 30" x 38.5" cabinet with kapor structure



Choice of wood for Cabinet: Kapor - Kapor solid structured wood cabinet was chosen by our customer in this case. We do have Chengal available as well. Both are naturally durable, containing substances which repel wood-destroying agents and fungal infestation. They can safely be used without preservative treatment in all climates. These two types of timber are water-resistant. Due to its hardy and solid nature, Kapur and Chengal enable support for heavy tanks.






Louver Doors - One popular key feature of our TJ cabinets are our 45 degree cutting downwards sloping at the top of doors, which allows minimal effort when opening the cabinet. As such, we do not need to open the doors using the conventional way of bending all the way down to open the doors from below, enhancing convenience. Our doors come with ABS trimmings. This ensure that the doors are waterproof, increasing protection of the doors. Louvers on the doors allow better ventilation as the electrical equipment such as pumps in the sump tank generates heat. Louvers enable the hot air to steam out and are thus highly recommended.

To be continued...

[nosense]

Lamination: 3 way lamination (WQ 5590FT Floral Revolution W by EDL for main body and EQ 5540FT Floral Revolution B by EDL for the louver doors) - we have 3-way lamination or 4-way lamination with many colors of the Formica to choose from. As the picture shows, we even line up the surface area of the holes with Formica paper for a neater look as well as better comfort. This is another trademark feature of TJ cabinets.




Hood: 9" - As requested, we constructed a hood which was tall enough to cover up the lights of the tank.


SUMP TANK

Sump Tank Specs: 48" x 18" x 18" 6mm



Main Sump Tank: straight and wet - we also have sloping sump tank as well as dry sump tank available.






Sump tank covers - Sump tank covers are provided to prevent water from splashing out and affecting the interior of the cabinet. We have installed 2 long strips along the last 3 compartments of the sump tank to allow the placing of the acrylic tank covers.




Full siliconless piping - Piping can be used for immediate submersion into the water as there will no acrylic or poisonous smell affecting the water. Our sump tanks use a special mould gasket instead.


To be continued...

[nosense]

ACCESSORIES AND MEDIAS





Full media package - Economical full media package and setup (Mr Aqua package). Includes Mr Aqua Ceramic Rings (5x boxes), Bio-ball (35x pcs), Jap Matt (3x pcs), Coral Chip (1kg), Bacteria House (36x pcs), Cotton wool (1x packet) and Volcano rocks (1kg)




Extensions - 5 way extensions (2x pcs)




Lighting - Hopar T5 lighting: 5ft - Customer chose 4 pieces of white. Many colours available as well.



OTHER SERVICES



-Provide the loan of 1x 5ft FGT with cover for running water as well as to soak the new medias at home of customer.




-Double water and fish transfer from old 5x2.5x2.5 cabinet.




-To supply Y-check valve and do drainage pipe above Y-check valve.

-To end the piping on top of the tank so that it touches the water.




-THE END-

[nosense]

by Tank Junction - 3ft cab & hood






Check out the special features and exclusive ideas of TJ in this product:


CABINET

Cabinet Specs: 36" x 18" x 35" 3 way cabinet with kapur structure



Choice of wood for Cabinet: Kapur - Kapur solid structured wood cabinet was chosen by our customer in this case. We do have Chengal available as well. Both are naturally durable, containing substances which repel wood-destroying agents and fungal infestation. They can safely be used without preservative treatment in all climates. These two types of timber are water-resistant. Due to its hardy and solid nature, Kapur and Chengal enable support for heavy tanks.





Louver Doors - One popular key feature of our TJ cabinets are our 45 degree cutting downwards sloping at the top of doors, which allows minimal effort when opening the cabinet. As such, we do not need to open the doors using the conventional way of bending all the way down to open the doors from below, enhancing convenience. Our doors come with ABS trimmings. This ensure that the doors are waterproof, increasing protection of the doors. Louvers on the doors allow better ventilation as the electrical equipment such as pumps in the sump tank generates heat. Louvers enable the hot air to steam out and are thus highly recommended.




Lamination: 3 way lamination (LIUS 622T Tane Maple)- We have 3-way lamination or 4-way lamination with many colors of the Formica to choose from. As the picture shows, we even line up the surface area of the holes with Formica paper for a neater look as well as better comfort. This is another trademark feature of TJ cabinets.






Hood: - As requested, we constructed a fully inclined hood with stainless steel semi-hydraulic catching with 45 degrees open cover.




Removable Center Structure - We have installed a structure in the center of the cabinet which offers better stability on a whole. It is removable and thus will not cause an obstruction when transportation of the sump tank is needed.


ADDITIONAL SERVICES



-Installation of 2 light tubes onto cabinet hood.




-THE END-

[nosense]

by Tank Junction - 72''x27''x27'' 12mm bare tank






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK


Tank Specs: 72''x27''x27'' with 12 mm thickness



Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.






Perimeter Bracing: Euro Bracing Top and Bottom – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general. Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.




Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chosen. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.







Oyama pasting: Black (Back), Red (Bottom) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White.Black as well as red oyama has been chosen in this case. Our customer also requested for a 3’’ water level mark. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.





-THE END-

[nosense]

by Tank Junction - 2x 1200mm x 400mm x 450mm with 10 mm thickness, 1x 1200mm x 660mm x 450mm with 12 mm thickness, 1x 1200mm x 800mm x 450mm with 12 mm thickness+sump tank+steel stand+mounting of chiller bracket






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: x2 1200mm x 400mm x 450mm with 10 mm thickness, x1 1200mm x 660mm x 450mm with 12 mm thickness, x1 1200mm x 800mm x 450mm with 12 mm thickness





Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.






Perimeter Bracing: Euro Bracing Top (2 way and 4 way) – Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general. Customer also had a special request of having a center partition for each tank with holes drilled in it.




Dow Corning silicon: Clear - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, clear silicon has been chosen. Black silicon is also available at your request.




Oyama pasting: Blue (Back, Bottom) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Blue Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.


STAND

Stand Specs: 1x 49" x 800mm x 1330mm 3-tier Stainless Steel Stand with 2” x 2” square bar, 1x 52" x 660mm x 1330mm 3-tier Stainless Steel Stand with 2” x 2” square bar



-The stainless steel used in the making of the stand offers better durability

To be continued...