eheim 2260 spare parts

[jamesbond]

hi guys.. anyone know where i can get the O-ring for eheim 2260, the bottom connector (25/32), the drainage pipe and also the top connector(16/22) pump? recently got 1 unit from a friend and realise this are the changes required.

if possible, also can PM the pricing to me

[tco]

The O ring can get from c328 or petmart and most probably rest of the parts too but need to know the part no. . All eheim parts come with specific part no. Go to eheim site to check or Google for it.

[Vitor]

Most Lfs can order from u.

West u can go qianhu, clementi c328
North seaview
East petmart or those farms.

I once need buy parts for 2260
I went sea view. But must deposit. Also need part number
They no stock. I ordered 2 days later can collect. Also got discount some more

- all of them get from qianhu, Eheim agent.
So if u go qianhu, they should have immediate stock.
But agent price.

[jamesbond]

got rough idea the price?

[Vitor]

Not sure
Likely a few dollars

I got my kit 7675950 at 3red notes plus abit from seaview after less 10%

I ask the screw kit 7675850 at whopping 4reds notes.... Just for 8 screws w 4 rubber boot.
Heng no need those.

I know the ports to the 2260 is using Bspp porting.
U can actually try hardware shop . Get the Bspp port pvc adapters ( come w oring) then diy to unions and.valves then save a lot.

Something like this pic

[Vitor]

[jamesbond]

i think i will stick to the stock.. else next time any issue also hard to dismantle the pvc pipe

[Vitor]

Just a ideal I saw online.



Well if u wanna get pvc , it's abt the cost that drIves as the original double tap biggest one for 2260 is near $80 each.

[Vitor]

Originally Posted by jamesbond

i think i will stick to the stock.. else next time any issue also hard to dismantle the pvc pipe

I havnt started my 2260 as I getting parts too.

My intent is similar, yes must use the union couplings , else cannot take apart easily .
Then w valves to ease for maintenance.

[AroChris]

Originally Posted by Vitor

Just a ideal I saw online.



Well if u wanna get pvc , it's abt the cost that drIves as the original double tap biggest one for 2260 is near $80 each.

The double I check at c328 is around $115 before discount.