Tank Junction (a subsidiary of sg Bros) *Apr'12 New Tanksets and other related svcs*

[nosense]

by Tank Junction - 72'' x 30'' x 30'' 12mm cab sump + full siliconless piping






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 72'' x 30'' x 30'' with 12 mm thickness






Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.







Overflow box: Triangular Left Hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay. The tank’s cleanliness can thus be maintained fuss-free. We also have our very own exclusive laser cut acrylic comb for the filter. This comb is unlike the others found in the market, boasting better flexibility but at the same time, very durable.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chose. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Oyama pasting: Black (Base, Back, Overflow) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.




Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.


To be continued...

[nosense]

CABINET

Cabinet Specs: 72" x 30" cabinet with kapor structure



Choice of wood for Cabinet: Kapor - Kapor solid structured wood cabinet was chosen by our customer in this case. We do have Chengal available as well. Both are naturally durable, containing substances which repel wood-destroying agents and fungal infestation. They can safely be used without preservative treatment in all climates. These two types of timber are water-resistant. Due to its hardy and solid nature, Kapur and Chengal enable support for heavy tanks.





Louver Doors and Removable Center Structure - One popular key feature of our TJ cabinets are our 45 degree cutting downwards sloping at the top of doors, which allows minimal effort when opening the cabinet. As such, we do not need to open the doors using the conventional way of bending all the way down to open the doors from below, enhancing convenience. Our doors come with ABS trimmings. This ensure that the doors are waterproof, increasing protection of the doors. Louvers on the doors allow better ventilation as the electrical equipment such as pumps in the sump tank generates heat. Louvers enable the hot air to steam out and are thus highly recommended. In this case, our customer has requested for rectangular holes to be constructed behind to facilitate the streaming of air instead of louvers on doors. The removal centre structure acts as a pivot to provide better stability and ease of removal of sump tanks.








Lamination: 3 way lamination (EFL 4005G Funky Black by EDL) - we have 3-way lamination or 4-way lamination with many colors of the Formica to choose from. As the picture shows, we even line up the surface area of the holes with Formica paper for a neater look as well as better comfort. This is another trademark feature of TJ cabinets.




Borders and hood - L-shape and straight borders covers up the sides of the tank, giving it a full height cabinet look. Hoods are constructed to cover up the lights of the tank.


SUMP TANK

Sump Tank Specs: 60" x 18" x 18/16" 8mm






Main Sump Tank: sloping and wet - we also have straight sump tank as well as dry sump tank available.

Sump tank covers - Sump tank covers are provided to prevent water from splashing out and affecting the interior of the cabinet. We have installed 2 long strips along the last 3 compartments of the sump tank to allow the placing of the acrylic tank covers.

Full siliconless piping - Piping can be used for immediate submersion into the water as there will no acrylic or poisonous smell affecting the water. Our sump tanks use a special mould casket instead.


ACCESSORIES AND MEDIA

Full media package: Economical full media package and setup (Mr Aqua package). Includes Mr Aqua Ceramic Rings(2.5L), Bio-ball, Jap Matt(3 pcs), Coral Chip(2kg), Bacteria House (36pcs), Cotton wool(1 pack) and Volcano rock(2kg). Additional accessories include the Dymax PH1200, Hopar UV 11V, Eheim 1264 pump


Lighting - Hopar T5 lighting 6ft: Choices of colours available






-THE END-

[nosense]

by Tank Junction - 72'' x 30'' x 24'' 12mm 2-tier + 48'' x 18'' stand only, 2pcs plywood



Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 2 tanks of dimensions 72'' x 30'' x 24'' with 12 mm thickness






Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chose. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Oyama pasting: Black (Base, Back, Left hand side, Right hand side, 3'' watermark) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.




Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.


METAL STAND

Metal Stand Specs: 72" x 30" x 41"



-double tier, 6-legged 2'' square bar with galvanized steel. Galvanized steel offers better protection against rust and longer endurance.


Metal Stand Specs: 48" x 18" x 36"



-4 legged 1''square bar.





-THE END-

[nosense]

by Tank Junction - 48'' x 24'' x 36'' metal stand & tpt 4x2x2 12mm bare tank


Metal Stand
- 48” x 24” x 36”
- 1.5'' square bar

Other Services
- Transportation of 4x2x2 12mm bare tank







-THE END-

[nosense]

by Tank Junction - 6x2.5x37'' single tier stand only + accessories


Metal Stand
- 6x2.5x37''
- single tier 2'' square bar
- 6-legged stand

Accessories/Medias
- supply 6 x 2.5 1’’ foam
- Mr Aqua Ceramic ring (5L)
- 6ft Mr Aqua OHF
- Additional OHF trays
- Jap Matt 10pcs
- Bio-Home Plus (1kg)

Other Services
- Transportation of 6x2.5x2 bare tank









-THE END-

[nosense]

by Tank Junction - 190cm x 30'' x 30'' 12mm tank + low profile metal stand



Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 190cm x 30'' x 30'' with 12 mm thickness





Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.


Dow Corning silicon: Clear - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, clear silicon has been chose. Black silicon is also available at your request.







Oyama pasting: White (Base, Back, Left hand side, right hand side, front rim 4'') - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. White Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever. In this case, our customer has also requested the pasting of the chinese characters '自在' in gold on the interior of the tank.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices. In this case, we have only placed 1 hole at the front of the tank on the right hand side and 1 hole at the back of tank on the left hand side as per customer’s request.


Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.


Metal Stand

Metal Stand Specs: 190cm x 30’’ x 12.5’’



- Low profile, 4-legged single tier with 2'' square bar.





-THE END-

[nosense]

by Tank Junction - 48'' x 24'' x 24'' 10mm tank + double tier stand



Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 48'' x 24'' x 24'' with 10 mm thickness



Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.


Dow Corning silicon: Clear - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, clear silicon has been chose. Black silicon is also available at your request.




Oyama pasting: Blue (Base, Back, Right hand side, Left hand side) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Blue Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.


Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.


Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.


Metal Stand

Metal Stand Specs: 48’’ x 24’’ x 41’’





Metal Stand
- double tier 1.5’’ bar with internal gap of 35''




-THE END-

[nosense]

by Tank Junction - supply of accessories + piping for OHF (3ft) union & rainbar


Accessories and Media
- 3ft OHF (x1 set)
- Riv8 2300ℓ/hr (x1 set)
- Mr Aqua 5L Ceramic Rings (x2 sets)
- Cotton Wool (x1 bag)
- Jap Matt for OHF (Tray Size) (x2 sets)
- Atman cannister (x1 set)

Other Services
- Piping for OHF(3ft) union and rainbar



-THE END-

[nosense]

by Tank Junction - 36'' x 16'' x 12'' 10mm and 32'' x 16'' x 12'' 10mm braceless tanks + 3-tier galvanised metal stand





Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: Tank 1 - 36'' x 16'' x 12'' with 10 mm thickness
Tank 2 - 32'' x 16'' x 12'' with 10 mm thickness

Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chose. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.


Oyama pasting: Black (Back, Left hand side and Right hand side) White (Bottom) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.



Metal Stand

Metal Stand Specs: 36'' x 16'' x 48.5''


Metal Stand - 3 tier 1.5'' bar with glavanized steel. Galvanized steel offers better protection and longer lasting endurance.


OTHER SERVICES

-To supply 1pc of 32'' x 16'' plywood and to spray it black.




-THE END-

[nosense]

by Tank Junction - 72'' x 30'' x 24'' 12mm cab sump + full siliconless piping, accessories + double water fish transfer






Check out the special features and exclusive ideas of TJ in this product:

MAIN TANK

Tank Specs: 72’’ x 30’’ x 24’’ with 12 mm thickness





Japan Asahi Grade 1 Glass - Nowadays, aquariums are considered as one of the most modern forms of interior décor accessory in home or workplace in order to enhance the overall aesthetic appeal. Our manufactured glass tanks boast of all round machine polish Japan Asahi Grade 1 glass to prevent cuts or injuries due to the smooth edges created by the machine polish as compared to hand chamfered tanks. Thus, a very refined and professional finishing look is guaranteed.




Perimeter Bracing – Euro Bracing Top and Bottom: Bracing for tanks on top as well as bottom. Strengthens and supports the glass of the tanks by pulling it together as pressure is always applied at the biggest surface areas which are the front and back; also not forgetting the works of gravitational pull at the bottom. Double-up as a support for glass covers and prevents fish from jumping out as well. Euro Bracing is characterized by a narrow glass strip that runs around the entire top perimeter of the tank, as well as a center glass brace that runs front to back. The braces are set inside the top and bottom edge of the tank. This thus adds stability to the tank in general.




Overflow box: Triangular Left-hand Side - Suction effect of this installation allows sediments at the bottom of the tank to be filtered out by flowing into the box instead of circulating in the tank. Over-flow box act as surface skimmer for suspended particles. Our overflows are constructed out of glass with acrylic overlay. The tank’s cleanliness can thus be maintained fuss-free. We also have our very own exclusive laser cut acrylic comb for the filter. This comb is unlike the others found in the market, boasting better flexibility but at the same time, very durable.


Dow Corning silicon: Black - Dow Corning silicon is widely acclaimed in the aquarium industry as the most suitable silicon for aquarium tanks as it is not poisonous and thus, will not harm the marine life in the tank. In this case, black silicon has been chose. Black silicon is beneficial for it will not take on dye from medication and if algae collect in the corners it will not be as visible. Clear silicon is also available at your request.




Oyama pasting: Black (Base, Overflow) - Oyama pasting is almost synonymous with a splendid looking fish tank. Oyama services are provided with a wide range of self adhesive color films available rather than the standard Black, Blue or White. Black Oyama has been chosen in this case. Feel free to personalize your tank with various colors of matt or gloss posters. Adding coloured film to your tank creates a decorative effect that really compliments the ambience of a room without dominating or overpowering it. We are open to any idea or design you may have in mind. We will be able to tell you if it's possible to create it, and give you a free estimate as to the fabrication cost. All with absolutely no obligation whatsoever.




Plumbing Holes – Almost all of the tanks manufactured by us have 4 machine polished holes on the top bracing, 2 holes at the front top bracing and 2 holes at the back top bracing. The holes can double-up as convenience sake when it comes to feeding small food and acts as a mean to tidy wire management such as the wire cords from wavemakers, oscillators and other types of surge devices.



Glass Covers – Our glass covers are finished with oyama trimmings with holes on top. Oyama trimmings are a safety precaution to protect you from cuts caused by the edges of glass covers. It also serves as an added resistance to breaking and chipping. The black oyama trimmings also give the tank a pleasant overall look. Holes drilled into glass covers allows better grip handle during removal of glass covers. Having glass panes reduces the level of evaporation particularly if the tank is situated in an air-conditioned room, which means you don’t need to top off the tank frequently.


To be continued...