My journey towards shirmp keeping.

[leezhengxi]

Originally Posted by bai

If the mesh is not wet they won't climb over.

Learn something new

[washywashy]

Originally Posted by bai

If the mesh is not wet they won't climb over.

Oh! Who knows they are guerrilla-trained! Hehe... Looking forward to updates after the cycling period Edmund!

[bai]

But not to the extend just 1-2cm above water......this they sure have the ability to do their guerrilla training.....hehe

[Koji™]

Originally Posted by cheetf

How is the water flow from the canister? If is too slow then chilling will not be so efficient, meaning the chiller will run a long time to chill the water to the temperature that you want.

Not just running a longer time for the chiller, it will be clogged with ice due to the slow flow rate into the chiller.

[Zhuoyuting]

TS good set up some have invest quite alot.

Hopefully you will update us your new tank setup.
Cheers!

[leezhengxi]

Originally Posted by Koji™

Not just running a longer time for the chiller, it will be clogged with ice due to the slow flow rate into the chiller.

Will see how it goes because i still have not turned on my chiller. Was recommended to use this chiller for my set up by the fish shop person


-Edmund
Sent from iPhone5

[leezhengxi]

Originally Posted by Zhuoyuting

TS good set up some have invest quite alot.

Hopefully you will update us your new tank setup.
Cheers!

Really invested quite a bit. Consider it as a birthday present to myself

Will update in time to come. Still in the early stages


-Edmund
Sent from iPhone5

[leezhengxi]

Added some cheap plants

[bettaforbetta]

you can add sponges on top of the dividers to maximize the use of your tank volume.

What are the two filter used?